SRAM/TruVativ GXP 83mm Bottom Bracket

$45.00
Add to cart
Threaded bottom brackets for SRAM and Truvativ cranksets. Engineered with the right materials for the application, including sealed cartridge bearings.
  • Drive side bearing ID is 24mm, non-drive side bearing ID is 22mm
  • Required installation tools: torque wrench, 8mm hex key, and Truvativ GXP bottom bracket tool (TL2342) or equivalent

SRAM/Truvativ GXP BB86 Stainless Steel Bottom Bracket Road

$50.00
Add to cart
Non-Threaded bottom brackets for SRAM and Truvativ cranksets. Engineered with the right materials for the application, including sealed cartridge bearings.

SRAM/Truvativ GXP BB92 Stainless Steel Bottom Bracket MTB

$50.00
Add to cart
Non-Threaded bottom brackets for SRAM and Truvativ cranksets. Engineered with the right materials for the application, including sealed cartridge bearings.

SRAM/TruVativ Self-Extracting Alloy Crank Arm Bolt for GXP M15/M22

$15.00
Add to cart
SRAM Crank Arm Fixing Bolts

TruVativ Atmos 7K Flat Handlebar – 760mm | 31.8mm | 0mm Rise

$85.00
Add to cart
The TruVativ ATMOS 7k Handlebar is an updated, more modern cross-country bar with a 760mm width and a 9° backsweep. The bar can be trimmed by up to 30mm per side allowing you to customize the bar to your preferred width. This bar is made of lightweight 7050 aluminum.
  • 760mm wide to start, and trimmable by 30mm each side
  • Made from tough 7050 lightweight aluminum
  • 250g at full width

TruVativ Atmos 7K Riser Handlebar – 760mm | 31.8mm | 10mm Rise

$85.00
Add to cart
The TruVativ ATMOS 7k Handlebar is an updated, more modern cross-country bar with a 760mm width and a 9° backsweep. The bar can be trimmed by up to 30mm per side allowing you to customize the bar to your preferred width. This bar is made of lightweight 7050 aluminum.
  • 760mm wide to start, and trimmable by 30mm each side
  • Made from tough 7050 lightweight aluminum
  • 250g at full width

TruVativ Atmos 7K Riser Handlebar – 760mm | 31.8mm | 20mm Rise

$85.00
Add to cart
The TruVativ ATMOS 7k Handlebar is an updated, more modern cross-country bar with a 760mm width and a 9° backsweep. The bar can be trimmed by up to 30mm per side allowing you to customize the bar to your preferred width. This bar is made of lightweight 7050 aluminum.
  • 760mm wide to start, and trimmable by 30mm each side
  • Made from tough 7050 lightweight aluminum
  • 250g at full width

TruVativ Giga Pipe Team SL 68 / 73 x 113mm ISIS Bottom Bracket

$54.00
Add to cart
ISIS is a splined interface bottom bracket/crank design used by Truvativ, FSA, Raceface and other brands.
  • Aluminum cups require TruVativ or compatible installation tool
  • Heat-treated chromoly spindle for high stiffness and moderate weight
  • Precision full-complement sealed cartridge bearings
  • M15 crank bolts included
  • Three bearings with two on drive side for extra life