Electronic Shifter Parts
Electronic Shifter Parts
Shimano BCR2 Charger for internal Di2 Battery
$135.00
Shimano Di2 Battery Chargers
- All Di2 components on the bicycle require the same firmware version
- Using Di2 components with different firmware versions may cause malfunctions
- For use with Alfine Di2, Dura-Ace 9070, R9100 and Ultegra 6870/6770 equipped bicycles
- SM-BCR2 Internal battery charger is specific to the SM-BTR2 and IBTDN1101 internal battery (BA9075)
- Includes USB (SM-USB1) power adaptor
- Plugs into SM-EW90 cockpit junction boxes or SC-S705 display unit
- Use with PC to update Di2 component firmware and change system functions with software from www.e-tubeproject.shimano.com
Shimano BT-DN300 Built-In DI2 Battery – For Dura-Ace 9250 and Ultegra R8150 Systems
$220.00
Shimano BT-DN300 Built-In DI2 Battery - For Dura-Ace 9250 and Ultegra R8150 Systems, Compatible with SD300 Wires
Shimano Di2 Batteries. Must purchase battery, charger, and power cable to complete the system.
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/
- Compatible with thinner, next generation electric SD300 wires and R9250 and R8150 series systems
- Features three SD300 wire ports
- Shared fixing method with BT-DN110
- Built-in type
- U.S. spec
Shimano EW-SD50 Di2 E-Tube Wire – 700mm
$31.00
Shimano E-Tube wires and connectors
- Frame grommets for E-tube internal-wiring compatible frames are sold separately, see Shimano Frame Grommet Kit Electronic Shifter Extra Parts
- Ultegra Di2 wires utilize Shimano's e-tube technology; e-tube is a two-prong system and is NOT cross compatible with Dura-Ace 7970 Di2 wiring
- All e-tube wires may be used for internal or external applications
Shimano EW90-A Di2 Cockpit Junction Box 3-Port
Original price was: $140.00.$109.99Current price is: $109.99.
Shimano Di2 Junction Box
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/
- SM-EW90-A 3-Port Cockpit Junction Box connects 1 pair of Di2 shifters to the frame junction box via 3 SD50 E-tube wires
- OEM front wiring kit for Dura-Ace Di2 9070
- LED battery charge level indicator
- Rear Derailleur adjustment mode
- Internal Battery charging port
- Includes Junction Box Band (CY9082) and Junction Box Hook (Mounting Plate, CY9081)
Shimano SM-JC41 Di2 Internal Frame Junction Box 4-Port
$38.00
Shimano Di2 Frame Junction Box
- Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/
SRAM AXS 4-Port Battery Base Charger
$130.00
SRAM AXS batteries, chargers, and battery accessories for all SRAM, eTap, and RockShox AXS system components.
- When you need a lot of AXS batteries charged in a hurry, the Four Battery Charger is the tool you want (Batteries sold separately)
- USB-C interface for improved conductivity and broad compatibility
- 60 minute charge time for four batteries, faster for one or two
- Fast charging feature gets batteries to 75% extra quick
- LED lights indicate charge status and power draw
- Convenient benchtop or wall mountable design
- Charges batteries used on SRAM eTap AXS derailleurs, Eagle AXS derailleurs, RockShox Reverb AXS seatposts, and Flight Attendant suspension
SRAM AXS Battery Charger
$55.00
SRAM AXS batteries, chargers, and battery accessories for all SRAM, eTap, and RockShox AXS system components. SRAM batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes up to 60 minutes to complete.
- Easy and fast charging for your SRAM batteries (battery sold separately)
- USB powered charger conneccts to any USB power source or A/C USB adaptor
- Battery charging takes up to 60 minutes to complete
- Charges batteries used on SRAM eTap AXS derailleurs, Eagle AXS derailleurs, RockShox Reverb AXS seatposts, and Flight Attendant suspension
SRAM AXS POD Ultimate Electronic Controller
$220.00
The AXS™ Pod transforms the crucial act of rider inputs into a vastly more personal experience for all of your AXS™ controls. Pod offers lighter weight than Eagle Ecosystem AXS™ Controllers, updated ergonomics and a vastly superior range of adjustability. Featuring a “click and fire” two-button design, with an intuitive action that requires the ideal amount of rider input to activate. Plus, it allows riders to personalize button assignments through the AXS™ App and accepts ergonomically adjustable buttons with subtle grip. With a unique flippable design, AXS™ Pods can be mounted left- or right-handed – it’s one component, with a world of possibilities.
- Light weight, more adaptable ergonomics, superior adjustability, and premium finish
- All-new “click and fire” two-button design provides Intuitive and straightforward action requiring the ideal amount of rider input
- Personalize paddle options for complete customizability via the AXS™ App
SRAM AXS Battery
$65.00
SRAM AXS batteries, chargers, and battery accessories for all SRAM, eTap, and RockShox AXS system components.
- Compatible with SRAM eTap AXS derailleurs, Eagle AXS derailleurs, RockShox Reverb AXS seatposts, and Flight Attendant suspension
- Includes battery terminal cover
- Incredibly lightweigth at only 24 grams
- Charges in 60 minutes or less
- Battery charger is sold separately